Oxygen concentrator
Lauf G 800
Цена: по запросу
Lauf G 800 oxygen concentrator produces a high concentration of 90–96% with molecular filtration of outside air.
This device is supposed to produce oxygen to anesthesia and respiratory equipment that it makes useful for surgical unit or intensive care unit, as well as for oxygen therapy or various therapeutic inhalations.
Lauf G 800 oxygen concentrator delivers up to 10 litres of oxygen per minute respectively. Output air of the device is up to 25 litres per minute. Two air outputs and two oxygen outputs are capable of operating with two devices simultaneously.
Technical characteristics
Output flow, (l / min), at least | 10 |
Output air flow, (l / min), at least | 25 |
Oxygen concentration performance (%) | 93±3 |
Output oxygen pressure (MPa), in the range | 0,35~0,40 |
Output air pressure (MPa), in the range | 0,35~0,40 |
Voltage (V) / Frequency (Hz) | ~230V±10% / 50 Hz±0,5Hz |
Power consumption (W) | 1500 |
Safety valve pressure (МPa) | 0,50 |
Three adsorption columns | |
Dehumidification system | |
Compressor engine active air cooling system | |
Internal receiver | |
Oxygen output | |
Three-stage filtration system | Сoarse filter (first level of filtration) Bacterial filter (second level of filtration) Fine filter (third level of filtration) |
Light indication: | P.O. – green light: mains supply H.O2 – blue light: О2 concentration ≥84% L.O2 – red light: О2 concentration <84% L.P. — yellow light: low pressure ≤0.25 MPa H.P. — red light: high pressure ≥0.45 MPa H.T. — red light: high temperature inside the case ≥80 °C |
Alarm | Low pressure alarm High pressure alarm High temperature alarm Power failure alarm |
Information displayed by LCD display: | Accumulated working time Presenting working time Operating pressure Temperature inside in the case |
Physical characteristics
Net weight (kg) | 80 |
Dimensions (LхWхH), mm | 600 х 580 х 720 |